There are many types of fiber optic patch cords such as OM1, OM2, OM3, OM4 multimode fiber and OS2 single mode fiber types. Both the ends of the cable are terminated with high performance hybrid or single type connector. These cords are not rugged and they are suitable for internal use.
However, when you have so many options, choosing the right once can be tricky. Here’s a look at how to choose the right fiber optic patch leads for your needs:
1. Choosing the connector type
Both the ends of fiber optic patch cord are terminated with fiber optic connector. Different connector is used for plugging different device. If the ports in the both ends devices are same, we can use LC-LC/ SC- SC/ MPO- MPO patch cables. If you want to connect different ports type devices, LC-SC/ LC-ST/ LC-FC patch cables may suit you.
2. Choose single or multimode cable type
The next step in choosing patch cord fiber optical is to choose between single or multimode. The single-mode fiber patch cord uses 9/ 125 um glass fiber which multimode used 50/ 125 um or 62.5 / 125 um glass fiber. While the former is used in long distance data transmission, the latter is used in short distance transmission.
3. Simplex or duplex
Simplex means the patch cord fiber optical is with one cord and there is only one fiber connector at each end which is used for bidirectional fiber optic transceivers. On the other hand, duplex can be regarded as two fiber patch cable put side by side used for common transceivers.
4. The cable length
The fiber optic patch cables are made in different lengths usually from 0.5 m to 0.50 m. You should choose an apt cable length according to the distance between the devices that you wish to connect.
5. Cable jacket type
There are three cable jacket types polyvinyl chloride, low smoke zero halogen, and optical fiber nonconductive plenum. You can make the choice based on their features.
Explore the web for more information and suggestions on choosing the right fiber optic patch leads.
However, when you have so many options, choosing the right once can be tricky. Here’s a look at how to choose the right fiber optic patch leads for your needs:
1. Choosing the connector type
Both the ends of fiber optic patch cord are terminated with fiber optic connector. Different connector is used for plugging different device. If the ports in the both ends devices are same, we can use LC-LC/ SC- SC/ MPO- MPO patch cables. If you want to connect different ports type devices, LC-SC/ LC-ST/ LC-FC patch cables may suit you.
2. Choose single or multimode cable type
The next step in choosing patch cord fiber optical is to choose between single or multimode. The single-mode fiber patch cord uses 9/ 125 um glass fiber which multimode used 50/ 125 um or 62.5 / 125 um glass fiber. While the former is used in long distance data transmission, the latter is used in short distance transmission.
3. Simplex or duplex
Simplex means the patch cord fiber optical is with one cord and there is only one fiber connector at each end which is used for bidirectional fiber optic transceivers. On the other hand, duplex can be regarded as two fiber patch cable put side by side used for common transceivers.
4. The cable length
The fiber optic patch cables are made in different lengths usually from 0.5 m to 0.50 m. You should choose an apt cable length according to the distance between the devices that you wish to connect.
5. Cable jacket type
There are three cable jacket types polyvinyl chloride, low smoke zero halogen, and optical fiber nonconductive plenum. You can make the choice based on their features.
Explore the web for more information and suggestions on choosing the right fiber optic patch leads.
No comments:
Post a Comment